Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
Wizards
7-58 FI0154601-00 C
S
6. Complete the wizard:
a. If you want to reboot the system now, click Yes. Otherwise, click No.
b. Click Finish.
Presentation Wizard
The Presentation wizard provides step-by-step instructions for mapping target
LUNs to iSCSI initiators.
When the Presentation wizard launches, the Device Selection dialog box
displays, as shown in Figure 7-53.
NOTE:
The new firmware will not take effect until the system is rebooted.
NOTE:
Initially, when Fibre Channel targets are presented as iSCSI targets, the
target’s LUNs are not accessible by iSCSI initiators. The LUNs must be
mapped to individual iSCSI initiators. Mapping protects the LUN’s data by
not allowing unauthorized access.