Filter
Top Products
FI0154601-00 C 4-1
4 Installation
This section describes how to install, configure, and recover a disabled
SANbox 6140 router. It also provides firmware installation instructions.
Site Requirements
The following sections describe the requirements for installing a SANbox 6140
router:
Management Workstation (see page 4-1)
Power Requirements (see page 4-2)
Environmental Conditions (see page 4-2)
Management Workstation
The management workstation running the SANsurfer iSCSI/FC Router Manager
must meet the requirements listed in Table 4-1.
Table 4-1. Management Workstation Requirements
Item Description
Operating system One of the following:
Windows
®
2000/2003/XP
Solaris 8/9/10
Linux
®
Red Hat EL 3.x
SuSE
®
Linux 9.0 Enterprise
Mac OS
®
X 10.3
Memory 256 MB or more
Disk space 150 MB per installation
Processor 500 MHz or faster
Hardware CD-ROM drive, RJ-45 Ethernet port, RS-232 serial port (optional)