Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
Action Menu
FI0154601-00 C 7-7
A
Disconnect – Disconnects from a SANbox 6140 router, removing it from the
system tree.
Reboot – Reboots the SANbox 6140 router.
View Logs – Opens the view logs window.
Presentation Wizard – Launches a wizard for presenting (mapping) LUNs
to iSCSI initiators (see page 7-64).
Presentation Unmap Wizard – Launches a wizard for unmapping LUNs
from iSCSI initiators (see page 7-64).
Ping – Initiates a ping from the specified port (management, GE1, or GE2)
to a specified IP address.
FW Update Wizard – Launches a wizard for updating the router’s firmware
(see page 7-54).
Add Initiator Wizard – Launches a wizard for entering an iSCSI initiator into
the system database (see page 7-52).
Remove Initiator – Removes the selected iSCSI initiator. This option is
available only when an initiator is selected (highlighted) in the system tree.
Remove Offline Target – Removes the selected offline Fibre Channel
target. This option is available only when an offline FC target is selected
(highlighted) in the system tree.
Beacon ON – Turns on the SANbox 6140 router beacon to quickly locate
the router.
Beacon OFF – Turns off the SANbox 6140 router beacon.