Filter
Top Products
A – Command Reference
Guest Account
A-2 FI0154601-00 C
S
Guest Account
Routers come from the factory with the following account already defined:
This guest account provides access to the router and its configuration. After
planning your router management needs, consider changing the password for this
account.
The guest account is automatically closed after 15 minutes of inactivity.
See the password command (page A-20) for information about changing
passwords.
Working with SAN Router Configurations
Successfully managing routers with the command line interface depends on the
effectively using router configurations. Key router management tasks include
modifying configurations, backing up configurations, and restoring configurations.
Modifying a Configuration
The router has three major areas of configuration:
Management port configuration, which uses the following commands:
set mgmt (see page A-33)
show mgmt (see page A-52)
ISCSI port configuration, which uses the following commands:
set iscsi (see page A-30)
show iscsi (see page A-45)
LUN Mapping, which uses the following command:
lunmask add (see page A-18)
Saving and Restoring Router Configurations
Saving and restoring a configuration helps protect your work. You can also use a
saved configuration as a template for configuring other routers.
Account name: guest
Password: password