Filter
Top Products
A – Command Reference
Commands
A-66 FI0154601-00 C
S
TargetMap Command
The targetmap command is not currently supported. Targets are automatically
presented.
Authority Admin session
Syntax targetmap
add
rm
Keywords add
Not supported
rm
Not supported
Examples The following example shows the targetmap add command:
QRouter (admin) #> targetmap add
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b:ab
1 20:00:00:20:37:fd:8a:b0,22:00:00:20:37:fd:8a:b0
2 20:00:00:20:37:fd:9c:f7,22:00:00:20:37:fd:9c:f7
3 20:00:00:20:37:fd:8d:00,22:00:00:20:37:fd:8d:00
Please select a target from the list above ('q' to quit): 0
Index (IP/WWNN) (MAC/WWPN)
----- ----------- ------------
0 0.0.0.0 00-c0-dd-07-42-4e
1 0.0.0.0 00-c0-dd-07-42-4f
2 20:00:00:c0:dd:07:42:4e 21:00:00:c0:dd:07:42:4e
3 20:00:00:c0:dd:07:42:4f 21:00:00:c0:dd:07:42:4f
Please select a portal from the list above ('q' to quit): 0
Command currently not supported by the firmware.