Filter
Top Products
7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-20 FI0154601-00 C
S
FC Ports
When you select an FC port in the system tree, the Information tabbed page
displays, as shown in Figure 7-18.
Figure 7-18 FC Port Information Tabbed Page
The FC port display consists of the following tabs:
Information
Advanced Configuration (see page 7-21)
Statistics (see page 7-23)
Information
The FC port display provides an Information tabbed page that contains details
about the selected port, including the following details:
Node Name – World-wide node name (WWNN) assigned to the FC port.
Port Name – World-wide port name (WWPN) assigned to the FC port.
Port Status – Drop-down menu lets you set the port status: Enabled or
Disabled.
Link Status – Port status, either Link Up or Link Down.
Port ID – The port ID assigned by the FC fabric or AL_PA when connected
on a private loop.
Actual Connection Mode – The port's connection mode, either
Point-to-Point or Loop.