Dell 2 Biscuit Joiner User Manual


 
Status of the NIC partitions for devices supporting partitioning.
You can view the WWN/MAC Address inventory using the Web interface or the RACADM CLI. Based on
the interface, you can filter the MAC address and know which WWN/MAC address is in use for that
function or partition. If the adapter has NPAR enabled, you can view which partitions are enabled or
disabled.
Using the Web interface, you can view the WWN/MAC Addresses information for:
Specific slots — Open the FlexAddress page, by clicking Server OverviewSlot <x>Setup
FlexAddress.
All the slots and server — Open the WWN/MAC Summary page, by clicking Server Overview
Properties WWN/MAC.
From both the pages, you can view the WWN/MAC Addresses information in the basic mode or the
advanced mode:
Basic Mode — In this mode, you can view Server Slot, Fabric, Protocol, WWN/MAC addresses, and
Partition Status. Only Active MAC addresses are displayed in the WWN/MAC address box. You can
filter using any or all of the fields displayed:
Advanced Mode — In this mode you can view all the fields displayed in the basic mode and all the
MAC types (Server Assigned, Flex Address, and IO Identity). You can filter using any or all of the fields
displayed.
In both the Basic mode and the Advanced mode, the WWN/MAC Addresses information is displayed in a
collapsed form. Click the plus symbol corresponding to a slot or click Expand/Collapse All to view the
information for a specific slot or all the slots.
You can also export the WWN/MAC Addresses information for all the servers in the chassis to a local
folder.
For information about the fields, see the Online Help.
Viewing Basic WWN/MAC Address Information Using
Web Interface
To view WWN/MAC Address information for each server slot or all servers in a chassis, in the basic mode:
1. Click Server OverviewProperties WWN/MAC
The WWN/MAC Summary page displays the WWN/MAC Address Information.
Alternatively, click Server OverviewSlot <x>Setup FlexAddress to view the WWN/MAC
Address information for a specific server slot. The FlexAddress page is displayed.
2. In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.
3.
Click the plus symbol corresponding to a slot or click Expand/Collapse All to expand or collapse
the attributes listed for a specific slot or all the slots in the WWN/MAC Addresses table.
4. From the View drop-down menu, select Basic, to view the WWN/MAC Addresses attributes in tree
view.
5. From the Server Slot drop-down menu, select All Servers or a specific Slot to view the WWN/MAC
Addresses attributes for all servers or servers in specific slots only respectively.
6. From the Fabric drop-down menu, select one of the fabric types to view details for all or specific
type of management or I/O fabric associated with the servers.
166