Filter
Top Products
Viewing KVM Information and Health Status
To view the health status of the KVMs associated with the chassis, do any of the following:
1. Click Chassis Overview.
The Chassis Health page is displayed. The left pane displays the front view of the chassis and
contains the health status of a KVM. KVM health status is indicated by the overlay of the KVM sub-
graphic. Move the pointer over an KVM sub-graphic and a corresponding text hint or screen tip is
displayed. The text hint provides additional information about the KVM. Click the KVM sub-graphic to
view the KVM information in the right pane.
2. Alternatively, click Chassis Overview → Front Panel.
On the Status page, under the KVM Properties section, you can view the status and properties of a
KVM associated with the chassis. For more information, see the Online Help.
Viewing LCD Information and Health
To view the health status of an LCD:
1. In the left pane, click Chassis Overview.
The Chassis Health page is displayed. The left pane displays the front view of the chassis. LCD health
status is indicated by the overlay of the LCD sub-graphic.
2. Move the cursor over the LCD subgraphic. The corresponding text hint or screen tip provides
additional information on the LCD.
3. Click the LCD sub-graphic to view the LCD information in the right pane. For more information, see
the Online Help.
Alternatively, go to Chassis Overview → Front Panel → Properties → Status. On the Status page,
under the LCD Properties, you can view the status of the LCD available on the chassis. For more
information, see Online Help.
Viewing Information and Health Status of Temperature
Sensors
To view the health status of the temperature sensors:
In the left pane, click Chassis Overview → Temperature Sensors.
The Temperature Sensors Status page displays the status and readings of the temperature probes on
the entire chassis (chassis and servers). For more information, see Online Help.
NOTE: The temperature probes value cannot be edited. Any change beyond the threshold
generates an alert that causes the fan speed to vary. For example, if the CMC ambient
temperature probe exceeds the threshold, the speed of the fans on the chassis increases.
Viewing Storage Capacity and Status of the Storage
Components
To view the capacity and fault-tolerant status of the storage components, do one of the following:
1. Go to Chassis Overview.
77