Filter
Top Products
Exported Data
The server inventory report contains data that was most recently returned by each Chassis Group
member during the Chassis Group leader’s normal polling (after every 30 seconds).
To get the most accurate server inventory report:
• The Chassis Group leader chassis and all Chassis Group member chassis must be in Chassis Power
State On.
• All servers in the associated chassis must be turned on.
The inventory data for the associated chassis and servers may be missing in inventory report, if a subset of
the Chassis Group member chassis are:
• In Chassis Power State Off state
• Turned off
NOTE: If a server is inserted while the chassis is turned off, the model number is not displayed
anywhere in the web interface until the chassis is turned on again.
The following table lists the specific data fields and specific requirements for fields to be reported for
each server:
Table 8. Server Module Inventory Field Descriptions
Data Field Example
Chassis Name Data Center Chassis Leader
Chassis IP Address 192.168.0.1
Slot Location 1
Slot Name SLOT-01
Host Name Corporate Webserver
NOTE: Requires a Server Administrator agent
running on the Server; otherwise shown as
blank.
Operating System Windows Server 2008
NOTE: Requires a Server Administrator agent
running on the Server; otherwise shown as
blank.
Model PowerEdgeM610
Service Tag 1PB8VF1
Total System Memory 4.0 GB
NOTE: Requires VRTX CMC 1.0 (or later) on
member; otherwise shown as blank.
# of CPUs 2
91