Dell 2 Biscuit Joiner User Manual


 
NOTE: To modify these settings, you must have the Debug Command Administrator privilege.
To access the Diagnostic Console:
1. In the left pane, click Chassis OverviewTroubleshootingDiagnostics.
The Diagnostic Console page displays.
2. In the Command text box, type a command and click Submit.
For information about the commands, see the Online Help.
The diagnostic results page appears.
Resetting Components
You can reset the active CMC, or virtually reseat servers making them to behave as if they were removed
and reinserted. If the chassis has a standby CMC, resetting the active CMC causes a failover and the
standby CMC becomes active.
NOTE: To reset components, you must have Debug Command Administrator privilege.
To reset the components using the CMC Web interface,
1. In the left pane, click Chassis OverviewTroubleshooting Reset Components.
The Reset Components page is displayed.
2. To reset the active CMC, in the CMC Status section, click Reset/Failover CMC. If a standby CMC is
present and a chassis is fully redundant, a failover occurs causing the standby CMC to become
active. However, if a standby CMC is not present, the CMC that is available is rebooted.
3. To virtually reseat the server, in the Virtual Reseat Server section, select servers to reseat, and then
click Apply Selections.
For more information, see the Online Help.
This operation causes the servers to behave as if they were removed and reinserted.
Saving or Restoring Chassis Configuration
This is a licensed feature. To save or restore a backup of the Chassis configuration using the CMC Web
interface:
1. In the left pane, click Chassis OverviewSetup Chassis Backup. The Chassis Backup page is
displayed. To save the chassis configuration, click Save. Override the default file path (optional) and
click OK to save the file. The default backup file name contains the service tag of the chassis. This
backup file can be used later to restore the settings and certificates for this chassis only.
2. To restore the chassis configuration, in the ”Restore" section, click Browse, specify the backup file,
and then click Restore.
NOTE:
CMC does not reset upon restoring configuration, however CMC services may take some
time to effectively impose any changed or new configuration. After successful completion,
all current sessions are closed.
Flexaddress information, server profiles, and extended storage are not saved or restored
with the Chassis Configuration.
210