Filter
Top Products
Interface Description
For client connection using Microsoft WinRM, the minimum required
version is 2.0. For more information, refer to the Microsoft article,
<support.microsoft.com/kb/968929>.
NOTE: The default values of CMC user name and password are root and calvin respectively.
Launching CMC Using Other Systems Management Tools
You can also launch CMC from the Dell Server Administrator or Dell OpenManage Essentials.
To access CMC interface using Dell Server Administrator, launch Server Administrator on your
management station. In the left pane of the Server Administrator home page, click System → Main
System Chassis → Remote Access Controller. For more information, see the Dell Server Administrator
User’s Guide at dell.com/support/manuals.
Downloading and Updating CMC Firmware
To download the CMC firmware, see Downloading CMC Firmware.
To update the CMC firmware, see Updating CMC Firmware.
Setting Chassis Physical Location and Chassis Name
You can set the chassis location in a data center and the chassis name to identify the chassis on the
network (default name is Dell Rack System). For example, an SNMP query on the chassis name returns
the name you configure.
Setting Chassis Physical Location and Chassis Name Using Web Interface
To set the chassis location and chassis name using the CMC web interface:
1. In the left pane, go to Chassis Overview, and then click Setup .
2. On the General Chassis Settings page, type the location properties and the chassis name. For more
information about setting chassis properties, see the CMC Online Help.
NOTE: The Chassis Location field is optional. It is recommended to use the Data Center, Aisle,
Rack, and Rack Slot fields to indicate the physical location of the chassis.
3. Click Apply. The settings are saved.
Setting Chassis Physical Location and Chassis Name Using RACADM
To set the chassis name, location, date, and time by using the command line interface, see the setsysinfo
and setchassisname commands. For more information, see the Chassis Management Controller for
PowerEdge VRTX RACADM Command Line Reference Guide.
Setting Date and Time on CMC
You can manually set the date and time, or you can synchronize the date and time with a Network Time
Protocol (NTP) server.
38