Filter
Top Products
Situation Command Output
FlexAddress: bound to
another chassis, svctag =
<Service tag Number> SD
card SN = <Valid flex
address serial number>
SD card in the active CMC
module that is bound to the
same service tag.
$racadm featurecard -s
The feature card inserted
is valid and contains the
following feature(s)
FlexAddress: bound
SD card in the active CMC
module that is not bound to any
service tag.
$racadm featurecard -s
The feature card inserted
is valid and contains the
following feature(s)
FlexAddress:not bound
FlexAddress feature not active on
the chassis for any reason (No SD
card inserted/ corrupt SD card/
after feature deactivated /SD card
bound to a different chassis).
$racadm setflexaddr [-f
<fabricName> <slotState>]
$racadm setflexaddr [-i
<slot#> <slotstate>]
ERROR: Flexaddress
feature is not active on
the chassis
Guest user attempts to set
FlexAddress on slots/fabrics.
$racadm setflexaddr [-f
<fabricName> <slotState>]
$racadm setflexaddr [-i
<slot#> <slotstate>]
ERROR: Insufficient user
privileges to perform
operation
Deactivating FlexAddress feature
with chassis powered ON.
$racadm feature -d -c
flexaddress
ERROR: Unable to
deactivate the feature
because the chassis is
powered ON
Guest user tries to deactivate the
feature on the chassis.
$racadm feature -d -c
flexaddress
ERROR: Insufficient user
privileges to perform
operation
Changing the slot/fabric
FlexAddress settings while the
server modules are powered ON.
$racadm setflexaddr -i 1
1
ERROR: Unable to perform
the set operation because
it affects a powered ON
server
Changing the Flexaddress
settings of slot or fabric, when
the CMC Enterprise License is
not installed.
$racadm setflexaddr -
i<slotnum> <status>
$racadm setflexaddr -
f<FabricName> <status>
ERROR: SWC0242 : A
required license is
missing or expired.
Obtain an appropriate
license and try again, or
contact your service
provider for additional
details.
169