Filter
Top Products
114 IBM 9077 SP Switch Router: Get Connected to the SP Switch
4. Load profile (optional).
Global executable binaries are set in the Load profile in the hw-table field.
These only change when you want to execute new run-time code in every
ATM card.
If you want to change the run-time code in one ATM card (per physical
interface), make the change in the Card profile, in the load field.
5. Dump profile (optional).
Global dump settings are in the Dump profile. These settings are usually
changed only for debug purposes. The keep-count field specifies how
many dumps are compressed and stored at one time for each media card.
The default setting is zero (0), which actually stores two dumps per day
(the current dump and the first dump of the day). Use caution if you
change the recommended default.
If you want to change dump settings for one ATM card (per interface),
make the change in the Card profile, in the dump field.
4.2.4 Assign IP Addresses - grifconfig.conf
Edit the grifconfig.conf file to assign an IP address to each logical ATM
interface. You can also provide other information about the logical IP network
to which that interface is physically attached, or specify a different MTU in the
arguments field, for example.
When you configure a logical interface on a point-to-point media such as
ATM, enter the destination IP address in the broad_dest address field. An
entry in the broad_dest address field for an ATM interface creates a
point-to-point connection to that address. If you do not specify a broadcast
address, you create a non-broadcast, multiaccess (NBMA) interface. The
optional arguments field is currently used to specify MTU values on a logical
Traffic_Shape name=high_speed_high_quality \
peak=155000 sustain=155000 burst=2048 qos=high
Traffic_Shape name=low_speed_high_quality \
peak=15500 qos=high
Interface ga010 traffic_shape=high_speed_high_quality
Interface ga0180 traffic_shape=low_speed_high_quality
PVC ga010 0/132 proto=ip traffic_shape=high_speed_high_quality
PVC ga0180 0/134 proto=ip traffic_shape=low_speed_high_quality