Filter
Top Products
Router Node 41
The attributes of the DependentNode class are described in detail as follows:
AttributeDescription
node_numberThis user-supplied node number represents the node position
of an unused SP Switch port used for the SP
Switch router adapter.
extension_node_identifierThis is a 2-digit slot number that the SP Switch
router adapter occupies on the GRF. Its
range is from 00 to 15.
reliable_hostnameThe hostname of the administrative Ethernet, de0, is the
GRF’s hostname. Use the long version of
the hostname when DNS is used.
management_agent_hostnameThis attribute is the hostname of the SNMP
agent for the GRF. For the GRF dependent
node, this is the same as the
reliable_hostname.
snmp_community_nameThis field contains the SNMP community name that
the SP Extension Node SNMP Manager and
the GRF’s SNMP Agent will send in the
corresponding field of the SNMP messages.
This value must match the value specified in
the /etc/snmpd.conf file. If left blank, a
default name found in the SP Switch Router
Adapter documentation is used.
The following attributes are derived by the RS/6000 SP system when the
SDR_config routine of
endefnode is invoked.
AttributeDescription
switch_node_numberThe switch port that the dependent node is attached
to.
switch_numberThe switch board that the dependent node is attached to.
switch_chipThe switch chip that the dependent node is attached to.
switch_chip_portThe switch chip port that the dependent node is attached
to.
switch_partition_numberThe partition number to which the dependent node
belongs.