IBM 9077 Router User Manual


 
286 IBM 9077 SP Switch Router: Get Connected to the SP Switch
# A netmask is required for all entries in this configuration file.
#
# The netmask is normally the mask of the remote network:
#
# 192.0.2.0 255.255.255.0 123.45.67.89
#
# For remote host routes, specify a netmask of 255.255.255.255:
#
# 192.0.2.1 255.255.255.255 123.45.67.89
#
# In the case of the default route (0.0.0.0), the netmask is ignored,
# but some value must be present for the file to parse correctly.
#
#
#
# destination netmask gateway/next hop
#
#0.0.0.0 0.0.0.0 192.0.2.2
default 0.0.0.0 192.168.4.137
#
# preferred routes during the residency
#
# 192.168.13.0 255.255.255.0 10.1.1.2
192.168.13.0 255.255.255.0 10.20.30.2
B.13 /etc/hosts
The file /etc/hosts contains the correlation between IP addresses and
hostnames.
#
# Host Database
# This file should contain the addresses and aliases
# for local hosts that share this file.
# It is used only for "ifconfig" and other operations
# before the nameserver is started.
#
#
127.1 localhost
#
# 10.200.160.3 install1.venus
192.168.4.4 grf16.msc.itso.ibm.com grf16
192.168.4.137 sp21en0.msc.itso.ibm.com sp21cw0
B.14 /etc/inetd.conf
This file is included here just for curiosity in case you are interested in why
ftp to the GRF is not possible.
#
# BSDI $Id: inetd.conf,v 2.2 1996/01/02 19:55:38 polk Exp $
# @(#)inetd.conf 8.2 (Berkeley) 3/18/94
#
#ftp stream tcp nowait root /usr/libexec/tcpd ftpd -l -A
telnet stream tcp nowait root /usr/libexec/tcpd telnetd
#shell stream tcp nowait root /usr/libexec/tcpd rshd
#login stream tcp nowait root /usr/libexec/tcpd rlogind -a
#exec stream tcp nowait root /usr/libexec/tcpd rexecd