IBM 9077 Router User Manual


 
58 IBM 9077 SP Switch Router: Get Connected to the SP Switch
Figure 24. System Partition Aid Notebook
These attributes are listed in the Node Information tab:
Node number
Switch port number
Assigned to system partition
2.4.5 SP Extension Node SNMP Manager
The SP Extension Node SNMP manager is contained in the ssp.spmgr file set
of PSSP. This file set must be installed on the Control Workstation in order for
the GRF to function as an extension node.
The SP Extension Node SNMP manager is an SNMP manager administered
by the System Resource Controller. The purpose of the SNMP manager is to
communicate with the SNMP agent on the GRF. The SNMP manager and the
agent adhere to Version 1 of the SNMP protocol. The SNMP manager sends
configuration data for an extension node to the SNMP agent on the GRF. The
SNMP agent applies the configuration data to the SP Switch Router Adapter
represented by the extension node. The SNMP agent also sends
asynchronous notifications in the form of SNMP traps to the SNMP Manager
when the extension node changes state. The following commands are
available to control the SP Extension Node SNMP Manager:
•startsrc