Filter
Top Products
SEMIAUTOMATIC WELDING
ACCESSORIES
LN-7 OR LN-8 WIRE FEEDERS - Semiautomatic, con-
stant speed wire feeders. For CV operation only.
LN-23P WIRE FEEDER - This portable wire feeder is
capable of CV operation. K350-1 Adapter Kit is
required.
LN-25 WIRE FEEDER - The LN-25 with or without an
external contactor may be used with the Commander
300.
NOTE: Gas-shielded welding requires a Magnum Gun.
Gasless welding requires an Innershield Gun.
OTHER WIRE FEEDERS FOR THE
COMMANDER 300
• NA-3 Automatic Wire Feeder
• LN-142 Semiautomatic Wire Feeder(requires
optional K1597-1 42VAC Transformer Kit).
HIGH FREQUENCY GENERATORS FOR
TIG APPLICATIONS
The K799 Hi-Freq Unit and the K930-ALL TIG Modules
are suitable for use with the Commander 300. The
Commander 300 is equipped with the required RF
bypass circuitry for the connection of high frequency
generating equipment. The high frequency bypass
network supplied with the K799 Hi-Freq Unit does NOT
need to be installed into the Commander 300.
The Commander 300 and any high frequency-generat-
ing equipment must be properly grounded. See the
K799 Hi-Freq Unit and the K930-AII TIG Module oper-
ating manuals for complete instructions on installation,
operation, and maintenance.
CONNECTION OF LINCOLN
ELECTRIC WIRE FEEDERS
ELECTRIC SHOCK can kill.
• Do not operate with panels open.
• Disconnect NEGATIVE (-) BATTERY
LEAD before servicing.
• Do not touch electrically live parts.
MOVING PARTS can injure.
• Keep guards in place.
• Keep away from moving parts.
• Only qualified personnel should
install, use or service this equip-
ment.
ACCESSORIES
C-3 C-3
COMMANDER 300
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
WARNING