Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
INSTALLATION
A-2 A-2
COMMANDER 300
TECHNICAL SPECIFICATIONS - Commander 300
INPUT - DIESEL ENGINE
Make/Model Description
Speed (RPM)
Displacement Starting Capacities
System
Deutz 3 cylinder 1800 Full Load 125 cu. in. Electric Fuel: 25 gal.
F3L 1011F Air/cooled 1900 High Idle (2.05 liters) 12 VDC (94.6 liters)
diesel 1400 Low Idle
31 HP Oil: 6.3 qt.
@ 1800 RPM (6.0 liters)
RATED OUTPUT - WELDER
Duty Cycle Welding Output Volts at Rated Amps
100% 300 amps (DC Multi-purpose) 32 volts
60% 375 amps (DC Multi-purpose) 34 volts
OUTPUT - WELDER AND GENERATOR
Welding Range Max. Open Circuit Voltage Auxiliary Power
1
30 - 300 Amps DC 87 OCV 120/240 VAC
in 5 Ranges @ 1900 RPM 10,000 Watts, 60 Hz.
100% Duty Cycle
PHYSICAL DIMENSIONS
Height
2
Width Depth Weight
42.0 in. 31.5 in. 63.1 in. 1325 lbs.
1066.8 mm 800.1 mm 1602.7 mm 1683 lbs.(601 kg)
1
Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2
Top of Enclosure. Add 8.9” (16mm) for exhaust.