Filter
Top Products
Technobeam
®
User Manual Factory-Installed Wheels B-1
Appendix B
Factory-Installed Wheels
This appendix shows how the litho wheel, rotating litho wheel, color
wheel and effects wheels are configured by the factory when
Technobeam is shipped. The numbers shown around the outside of
the wheels are the position numbers used by a controller to select that
effect. For example, choosing position 6 on the Technobeam rotating
litho wheel (see Figure B-1) with a controller selects the “Rip Wheel”
litho.
Technobeam™ Wheels
Technobeam rotating litho wheel:
Figure B-1. Factory configuration of the Technobeam rotating litho wheel.
1 (open)
2
3-D Blocks
3
Round Triangle
4
Silcsquare
5
TB-Lumoil
(2 lithos;
one rotating,
one stationary)
6
Rip Wheel
7
Technowedges
8
Gatlin