Filter
Top Products
Technobeam
®
User Manual Important Safety Information C-1
Appendix C
Important Safety
Information
English Version
Warning: For Continued Protection Against Fire
1. This equipment is designed for use with Phillips M Series 250 watt, GY9.5 base metal
halide lamp only. Use of any other type lamp may be hazardous and may void the
warranty.
2. Do not mount on a flammable surface.
3. Maintain minimum distance of 1.0 meter (3.28 feet) from combustible materials.
4. Replace fuses only with the specified type and rating.
5. Observe minimum distance to lighted objects of 1.0 meter (3.28 feet).
6. This equipment for connection to branch circuit having a maximum overload
protection of 20 A.
Warning: For Continued Protection Against Electric Shock
1. If this equipment was received without a line cord plug, attach the appropriate line
cord plug according to the following code:
•brown–live
•blue–neutral
• green/yellow–earth
2. As the colours of the cores in the mains lead of this equipment may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows:
• the core which is coloured green and yellow must be connected to the ter-
minal in the plug which is marked with the letter E or by the earth symbol
, or coloured green or green and yellow.
• the core which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
• the core which is coloured brown must be connected to the terminal which
is marked with the letter L or coloured red.
3. Class I equipment. This equipment must be earthed.
4. Disconnect power before re-lamping or servicing.
5. Equipment suitable for dry locations only. Do not expose this equipment to rain or
moisture.
6. Refer servicing to qualified personnel; no user serviceable parts inside.