Filter
Top Products
Technobeam
®
User Manual Menu Options 3-25
The following construct values are available for viewing:
• PANH - high 8-bit pan
• PANL - low 8-bit pan
• TLTH - high 8-bit tilt
•TLTL - low 8-bit pan
• COLC - color control channel
• COL - color wheel position
• LTOC - litho control channel
• LTO - litho wheel position
• LTR - litho rotation
• FCUS - lens tube position
• FX - effects wheel position
• FXR - effects wheel rotation
• IRIS - iris position*
• SHUT - shutter strobe
• DIM - shutter dim flag
• MSPD - MSpeed time
• LAD - Laser Aiming Device*
• CNTL - control channel
*
Note
If your Technobeam-i does not have an iris and/or Laser
Aiming Device (LAD), the iris and LAD-related constructs
will have no functionality.
To view the DMX status and construct values:
1. Press and hold the <Menu> button until “ADDR” appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu
and press the <Enter> button to select the “INFO” menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the “DMX” menu
and press the <Enter> button to select the “DMX” menu.
4. Using the <Up> and <Down> arrow buttons, scroll to the “FIXT” menu
and press the <Enter> button to select the “FIXT” menu.
5. Using the <Up> and <Down> arrow buttons, scroll to the desired DMX
status or construct (listed above) and press the <Enter> button to
select the desired option. The LED will display the selected DMX status
or construct value.
If you are having a particular problem with the fixture, follow the steps
above to select a construct and view its value. After noting the value of
the construct you selected, use your controller to change that
construct’s value.
If the value changes on the fixture’s LED display, but the fixture still
does not respond, contact High End Systems customer service.
However, if the value does not change on the fixture’s LED display,
remove the fixture from the DMX link and try to change the construct’s