Filter
Top Products
Technobeam
®
User Manual Menu Map 3-3
Menu Map
A complete menu map and explanations of the Technobeam menu
options are listed in this section. See individual subsections in this
addendum for descriptions of each menu item.
Chapter 4 has more information about using the menus to program the
fixture’s sixteen onboard scenes (presets).
Note
If your Technobeam-i does not have an iris and/or Laser
Aiming Device™ (LAD®), the iris and LAD-related menu
items listed below will have no functionality.
Although Technopro and Technoray fixtures have been
discontinued, their menu options still exist in the
protocol, and are listed below.
Table 3-1. Technobeam Menu Map
Menu
Level 1
Menu
Level 2
Menu
Level 3
Menu
Level 4
Menu
Level 5
Description
ADDR Fxx/Cxxx
change the existing fixture number/DMX start
channel
SET
FACT
ON set factory defaults on
OFF
set factory defaults off
Note: Selecting this option has no affect on
individual preset values.
SWAP
ON set pan/tilt swap on
OFF set pan/tilt swap off
T/IN
ON set tilt invert on
OFF set tilt invert off
P/IN
ON set pan invert on
OFF set pan invert off
DSPL
ON set LED display on
OFF set LED display off
DIM dim LED display
D/IN
ON invert LED display orientation
OFF set normal LED display orientation
CHNL
DMX set control method to DMX start channel
ADDR set control method to fixture number
LMPL
ON enable lamp hour warning message
OFF disable lamp hour warning message
LENS
NORM factory lens or narrow angle lens setting
WIDE wide angle lens setting
NARW
standard or narrow angle lens setting that
increases the distance the lens tube can move
to allow for a greater throw distance
Note: This option is not for use with wide angle
lenses.