Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
LAN Configuration 4-21
v1.0, September 2009
Enable DHCP Server
(continued)
Primary DNS
Server
This is optional. If an IP address is specified, the UTM
provides this address as the primary DNS server IP
address. If no address is specified, the UTM provides its
own LAN IP address as the primary DNS server IP address.
Secondary DNS
Server
This is optional. If an IP address is specified, the UTM
provides this address as the secondary DNS server IP
address.
WINS Server This is optional. Enter a WINS server IP address to specify
the Windows NetBios Server IP if one is present in your
network.
Lease Time Enter a lease time. This specifies the duration for which IP
addresses is leased to clients.
DHCP Relay Select the DHCP Relay radio button to use the UTM as a DHCP relay agent for
a DHCP server somewhere else on your network. Enter the following setting:
Relay Gateway The IP address of the DHCP server for which the UTM
serves as a relay.
Enable LDAP
information
Select the Enable LDAP information checkbox to enable the DHCP server to
provide Lightweight Directory Access Protocol (LDAP) server information. Enter
the following settings:
LDAP Server The IP address or name of the LDAP sever.
Search Base The search objects that specify the location in the directory
tree from which the LDAP search begin. You can specify
multiple search object, separated by commas. The search
objects include:
• cn (for common name)
• ou (for organizational unit)
• o (for organization)
• c (for country)
• dc (for domain)
For example, to search the in Netgear.net domain for all last
names of Johnson, you would enter:
cn=Johnson,dc=Netgear,dc=net
port The port number for the LDAP server. The default setting is
zero.
Table 4-3. DMZ Setup Settings (continued)
Setting Description (or Subfield and Description)