Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
3-18 Manually Configuring Internet and WAN Settings
v1.0, September 2009
2. Click the Secondary Addresses option arrow. On the UTM25, the WAN1 Secondary
Addresses screen displays (see Figure 3-10, which shows the UTM25 screen with some
examples in the List of Secondary WAN addresses table). On the UTM10, the WAN
Secondary Addresses screen displays.
The List of Secondary WAN addresses table displays the secondary LAN IP addresses added
to the UTM.
3. In the Add WAN1 Secondary Addresses section (UTM25) or Add WAN Secondary
Addresses section of the screen (UTM10), enter the following settings:
• IP Address. Enter the secondary address that you want to assign to WAN1 port (UTM25)
or to the single WAN port (UTM10).
• Subnet Mask. Enter the subnet mask for the secondary IP address.
4. Click the add table button in the rightmost column to add the secondary IP address to the List
of Secondary WAN addresses table.
Repeat step 3 and step 4 for each secondary IP address that you want to add to the List of
Secondary WAN addresses table.
Figure 3-10