Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Monitoring System Access and Performance 11-25
v1.0, September 2009
2. Click the IPSec VPN Connection Status submenu tab. The IPSec VPN Connection Status
screen displays.
The Active IPsec SAs table lists each active connection with the information that is described
in Table 11-12. The default poll interval is 5 seconds. To change the poll interval period, enter
a new value in the Poll Interval field, and then click set interval. To stop polling, click stop.
To review the status of current SSL VPN tunnels:
1. Select Monitoring > Active Users & VPNs from the main menu. The Active Users & VPN
submenu tabs appear, with the Active Users screen in views
Figure 11-14
Table 11-12. IPsec VPN Connection Status Information
Item Description (or Subfield and Description)
Policy Name The name of the VPN policy that is associated with this SA.
Endpoint The IP address on the remote VPN endpoint.
Tx (KB) The amount of data that is transmitted over this SA.
Tx (Packets) The number of IP packets that are transmitted over this SA.
State The current status of the SA. Phase 1 is the authentication phase and Phase 2 is
key exchange phase. If there is no connection, the statu is IPsec SA Not
Established.
Action Click the connect table button to build the connection or click the drop table
button to terminate the connection.