Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
A-2 Default Settings and Technical Specifications
v1.0, September 2009
Table A-2 shows the physical and technical specifications for the UTM.
(continued) DHCP server Enabled
DHCP starting IP address 192.168.1.2
DHCP starting IP address 192.168.1.100
Management
Time zone GMT
Time zone adjusted for daylight savings time Disabled
SNMP Disabled
Remote management Disabled
Firewall
Inbound (communications coming in from the Internet) All communication denied
Outbound (communications from the LAN to the Internet) All communication allowed
Source MAC filtering Disabled
Stealth mode Enabled
Respond to ping on Internet ports Disabled
Table A-2. UTM Physical and Technical Specifications
Feature Specification
Network Protocol and Standards Compatibility
Data and Routing Protocols
TCP/IP, RIP-1, RIP-2, DHCP
PPP over Ethernet (PPPoE)
Power Adapter
Universal input 100-240V, AC/50-60Hz, 1.2 Amp maximum
Physical Specifications
Dimensions (W x H x D)
cm 33 x 4.3 x 20.9
inches 13 x 1.7 x 8.2
Weight
kg. 2.1
lb. 4.6
Table A-1. UTM Default Configuration Settings (continued)
Feature Default behavior