Filter
Top Products
X-STREAM
5-15
Instruction Manual
HASAxE-IM-HS
05/2006
Emerson Process Management GmbH & Co. OHG
5 User Interface
5-4-2-2 Span Calibration Menu
5-4 Menu System - Control Menu
Dual channel instrument:
Pressing the key returns to the optional gas
component selection menu to perform the
same action for the other measuring channel.
Note!
For detailed descriptions of how to perform
calibrations chapter 7 Maintenance.
Control..
Span calibration..
Dual channel instrument:
Optional gas component selection menu -
Select the component to be calibrated.
When this line is selected, pressing the key
cancels the span calibration procedure without
any changes
When this line is selected, pressing the key
starts the span calibration procedure
Current span gas concentration setting (Infor-
mation only; setup span gas concentration in
the "SETUP" menu 5-4-3-2-1, page 5-24)
Current gas concentration
1
st
menu page
CANCEL calibration!
START calibration!
SpanGas 2000.0 ppm
CO2.1 134.1 ppm
Enter this line and start the related procedure
to reset calibration parameters to the data
stored as user configuration. (By default this is
the factory data set, if not manually overwritten
by the user, 5-4-3-8 "SAVE-LOAD-UP-
DATE" menu on page 5-45).
2
nd
menu page
RESET calibration..
Status..
CO2.1 134.1 ppm
Current gas concentration
Select this line and press the key to view
the calibration status screen ( page 5-17)