Emerson HASAxE-IM-HS Welding Consumables User Manual


 
X-STREAM
Instruction Manual
HASAxE-IM-HS
04/2006
Emerson Process Management GmbH & Co. OHGS-4
Safety Instructions
ELECTRICAL SHOCK HAZARD !
Do not operate without covers secure. Do not open while energized.
Installation requires access to live parts which can cause death or serious
injury.
For safety and proper performace this instrument must be connected to a
properly grounded three-wire source of power.
SAFETY SUMMARY
To avoid loss of life, personal injury and damage to this equipment and on-site property, do
not operate or service this instrument before reading and understanding this instruction
manual and receiving appropriate training. Save these instructions.
AUTHORIZED PERSONNEL
If this equipment is used in a manner not specified in these instructions, protective systems
may be impaired.
INTENDED USE STATEMENT
X-Stream series gas analyzers are intended to be used as analyzers for industrial purposes.
They must not be used in medical, diagnostic or life support applications nor as safety
devices, and no independent agency certifications or approvals are to be implied as
covering such applications!
TOXIC GASES !
This unit’s exhaust may contain toxic gases such as sulfur dioxide.
These gases can cause serious injuries.
Aviod inhalation of the exhaust gases at the exhaust fitting.
Connect exhaust outlet to a safe vent. Check vent line and connections for
leakage.
Keep all fittings tight to avoid leaks. See section 7-2, page 7-2 for leak test
instructions.