Filter
Top Products
X-STREAM
Emerson Process Management GmbH & Co. OHG 6-11
Instruction Manual
HASAxE-IM-HS
05/2006
6 Initial Startup
6-2 Checking the Instrument's Setup
Press the LEFT key several times to return to
the SETUP MENU.
The cursor is now placed in the IN/OUTPUTS..
line, overwriting a small triangle. Press the
DOWN key to enter the next SETUP MENU
page and enter the "Installed options.." menu
to view the installed options.
Installed options..
Communication..
Alarms..
Save-Load-Update..
Installed options
Valves: Internal
COM-Interf: Yes
Pump: Yes
DigitalInp: Yes
PressSensor:Internal
Flow monitor: Yes
This menu consists of two pages, showing the
status of available options. The entries of your
specific instrument may differ from those shown
at the left, depending on its configuration!
Do not change entries on these
pages without detailed know-
ledge!
Wrong entries may cause faulty
measuring results or strange
analyzer behaviour!
When entering this menu for the
first time just use it to get
informed about the instrument's
configuration.
If system is setup accordingly access level 3
code must be entered to access this menu.
Factory default setting is "no code required".