Hitachi SJ300-037HFE Welding System User Manual


 
SJ300 Inverter
Appendix C
C–15
Expansion Card
Functions
“P” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FE (Europe) -FU (USA) -FR (Japan)
P001 Operation mode on expansion card 1
error
00 00 00
P002 Operation mode on expansion card 2
error
00 00 00
P010 Feedback option enable 00 00 00
P011 Encoder pulse-per-revolution (PPR)
setting
1024 1024 1024
P012 Control pulse setting 00 00 00
P013 Pulse line mode setting 00 00 00
P014 Home search stop position setting 0. 0. 0.
P015 Home search speed setting 5.00 5.00 5.00
P016 Home search direction setting 00 00 00
P017 Home search completion range
setting
555
P018 Home search completion delay time
setting
0.00 0.00 0.00
P019 Electronic gear set position selection 00 00 00
P020 Electronic gear ratio numerator
setting
1. 1. 1.
P021 Electronic gear ratio denominator
setting
1. 1. 1.
P022 Feed-forward gain setting 0.00 0.00 0.00
P023 Position loop gain setting 0.50 0.50 0.50
P025 Temperature compensation
thermistor enable
00 00 00
P026 Over-speed error detection level
setting
135.0 135.0 135.0
P027 Speed deviation error detection level
setting
7.50 7.50 7.50
P031 Accel/decel time input selection 00 00 00
P032 Positioning command input selec-
tion
00 00 00
P044 DeviceNet comm watchdog timer 01 01 01
P045 Inverter action on DeviceNet comm
error
21 21 21
P046 DeviceNet polled I/O: Output
instance number
71 71 71