Filter
Top Products
ACU-RITE 3500i 131
7.1 Explaining Basic Cycles
Arc Move - Center and Angle:
Specify the arc movement using the coordinates of the arc center
point and the included polar angle.
Field Code Description
Direction E Specifies a clockwise (CW) or
counterclockwise (CCW) arc direction.
(Required)
Xcenter I Absolute position of, or incremental
distance to, the desired X-Axis arc center
point. (Required)
Ycenter J Absolute position of, or incremental
distance to, the desired Y-Axis arc center
point. (Required)
Angle C Included polar degree angle of the arc.
(Required)
Z Z Absolute position of, or incremental
distance to, the desired Z-Axis destination.
Feed F Feedrate at which to conduct the
machining movement.
CornerRad A Positive arc radius for corner rounding,
negative X/Y distance for chamfering.