Filter
Top Products
282 10 CAM: Programming
10.1 CAM Programming
Line Tool buttons
Touching the Line Tool button activates the following
buttons in the Vertical button bar.
Button Function
Select Parallel line in the Y axis to create a line
parallel to the Y axis at an X coordinate.
Select Parallel line in the X axis to create a line
parallel to the X axis at an Y coordinate.
Select Line between two points to create a line
going through two points.
Select Angular Line from a point to create a line
going through a point at a specific angle.
Select Line Offset to create a line offset from
another line.
Select Tangent line from a point to create a line
tangent to a circle and going through a point.
Select Tangent line between two circles to create
a line tangent to two circles.
Select Tangent line at a specific angle to create
a line tangent to a circle at a specific angle.
When more than one solution is available, they are all
displayed. The user can select the desired one(s); when
done, click on an empty area.