Filter
Top Products
ACU-RITE 3500i 345
10.1 CAM Programming
Select the Job Setup button from the Vertical button
bar to open the Job Setup dialogue.
For the Program Units select “Inch”.
Enter “1” for the Tool Number.
Enter .375 for the Tool Diameter.
Enter -1 for the Tool Length.
Enter Define and Use Tool for the Tool Action.
Touch Use to accept the Job Setup tool path.
Select the Block Form button from the Vertical button
bar to open the Block Form dialogue.
Xmax: Enter 6.000.
Ymax: Enter 1.000.
Zmax: Enter 0.000.
Xmin: Enter -2.000.
Ymin: Enter -7.000.
Zmin: Enter -1.000.
Or
Select the Estimate BlockForm button to have CAM estimate the
Block Form dimensions from the defined shape(s).
Touch Use to accept the Block Form.