Filter
Top Products
ACU-RITE 3500i 293
10.1 CAM Programming
Block Form: Basic tab
Basic tab Data Entries
Block Form defines the dimensions of the stock. The Block Form is
used for graphical purposes only and allows a solid 3D view of the
program to be generated. At least one Block Form must be defined in
the program. Multiple Block Forms are allowed and are displayed in
the sequence they are arranged in the program. An estimated Block
Form can also be automatically generated; see "Output tab:" on page
311.
Data Input Fields. All fields must be filled in.
Xmax
Enter the maximum edge in the X-axis of the stock from part zero.
Ymax
Enter the maximum edge in the Y-axis of the stock from part zero.
Zmax
Enter the top of the stock in relation to part zero.
Xmin - Choose None, Use, or Off
Enter the minimum edge in the X-axis of the stock from part zero.
Ymin
Enter the minimum edge in the Y-axis of the stock from part zero.
Zmin
Enter the depth of the part from top to bottom in relation to part
zero.
Comment Tab
Comment
To add a comment if needed that will be placed in program to assist
the operator. Typical to most dialogues.