Filter
Top Products
358 11 G-Code Edit, Help, & Advanced Features
11.1 G-Code Program Editing
Moving Blocks in a program
Moving one or more blocks is accomplished by using the Cut button.
In Edit Mode, place the cursor at the beginning of the
first of one, or more blocks to be moved, then touch
the Edit Features button.
Touch the Mark button. Use the Arrow keys to mark
additional blocks below, or above the cursor location.
Touch the Cut button to remove the block, or blocks
selected, and place them on the clipboard.
Place the cursor at the beginning of a block where the
blocks are to be inserted, and touch the Insert Block
button.
With the cursor at the beginning of the new empty
block line, touch the Paste button to move the
selected blocks to the new location.
Canceling edits to a program block:
Using the Undo button sequentially steps backwards undoing all
previous steps.
Touch the Undo button to undo one or more recent
actions taken in sequential reverse order.
Continue touching the Undo button will continue to remove recent
actions taken in sequential reverse order.
Restore edits to a program block:
Using the redo button to reverse edits made to a program and restore
the block(s) to its edited form.
Touch the Redo button to redo one or more recent
undo.
Continuing to touch the Redo button will continue to redo recent
undo.