Filter
Top Products
254 8 Drawing Programs
8.1 Draw
8.1 Draw
Viewing Programs
Draw Graphics (part graphics) is a method by which to prove a
program before you cut any material. It allows you to view the part
edge and/or tool path from different angles, inspect the moves the
machine is programmed to make, without necessarily moving the
axes. This reduces waste and the chance of damaging a part.
In Draw Simulation Mode, the 3500i runs programs and simulates
machine movements in the viewing area. The machine does not
move.
Always prove a program in Draw before running the
machine.
1 Program name
2 View Option vertical button menu
3 Bottom menu bar with programing buttons
4 View display with rulers activated
5 Top menu bar
6
Status indicator showing if the program is stopped (red), or
running (green)
7 Estimated machining time of the program