Filter
Top Products
ACU-RITE 3500i 19
1.2 Visual Display Unit
Console Key Pad
The following keys are located on the console key pad. There is also
a quick reference guide located at the beginning of this manual, see
"Controls of the 3500i" on page iv.
1 Axis keys, use to select the required axis.
2 Numeric keys, use to enter numeric data, included is the toggle
key for “Plus/Minus” data entry.
3 CLEAR key, use to clear selections such as values entered.
4 ENTER key, use to activate selections, and entries.
5 Arrow keys, use to navigate around the screen, and highlight
dialogue fields.
6 HAND key, use to cycle the CNC through manual movement
modes: RAPID JOG, JOG FEED, JOG @ 100, JOG @ 10, JOG @ 1.
7 Manual move (Jog) Axis keys, use to manually move (Jog) the
machine axis in the direction required.
8 SERVO RESET, use to activate servo motors.
9 STOP key, use to stop a program that is running, or a machine
operation. Same as Stop button in Machine function buttons.
10 START key, use to start a program to run, or a machine operation
previously stopped. Same as Start button in Machine function
buttons.