Filter
Top Products
Solaris SFS Driver User Manual Page 106
#
If you do not want the utility to pause for verification, add a "-y" option just after the device path, and the
emlxadm utility will skip the verification. For example:
# emlxadm /devices/pci@1e,600000/SUNW,emlxs@2/fp@0,0:devctl -y get_state
21000020371938fa
Information similar to the following is displayed:
Found path to 1 HBA port(s).
HBA port: /devices/pci@1e,600000/SUNW,emlxs@2/fp@0,0:devctl
State: PORT_DEVICE_LOGGED_IN
#
If you want to run a command on multiple HBAs at once, you can use a pattern string instead of a full
device path. If the entire pattern string matches any part of an HBA device path, the command will
execute against that HBA. Again, in this example the emlxadm utility pauses to ask if you want to
continue before executing the command. For example:
# emlxadm "SUNW,emlxs@2" get_num_devs
Information similar to the following is displayed:
Found path to 2 HBA port(s).
HBA port: /devices/pci@1e,600000/SUNW,emlxs@2/fp@0,0:devctl
> Do you wish to continue with this device [y,n,q] ? y <--- Response
required
There are 5 devices reported on this port.
HBA port: /devices/pci@1e,600000/SUNW,emlxs@2,1/fp@0,0:devctl
> Do you wish to continue with this device [y,n,q] ? y <--- Response
required
There are 0 devices reported on this port.
#
If you do not want the utility to pause for verification, add a "-y" option just after the pattern string, and
the emlxadm utility will skip the verification. For example:
# emlxadm "SUNW,emlxs@2" -y get_num_devs
Information similar to the following is displayed:
Found path to 2 HBA port(s).
HBA port: /devices/pci@1e,600000/SUNW,emlxs@2/fp@0,0:devctl
There are 5 devices reported on this port.
HBA port: /devices/pci@1e,600000/SUNW,emlxs@2,1/fp@0,0:devctl
There are 0 devices reported on this port.
#
This mode of operation enables you to use the emlxadm utility as part of a script or another program
capable of executing system level calls.