Filter
Top Products
Solaris SFS Driver User Manual Page 76
All relevant information for the selected port is automatically added to the Target Identifier sec-
tion of the Diagnostics dialog box.
Figure 39: HBAnyware Utility, Select Echo Test Target Window
5. Click Start. The following warning window appears:
Figure 40: HBAnyware Utility, Advanced Diagnostic Tests Warning
6. Click OK. A result screen appears and the test results appear in the Test Log. Click Clear to
erase the contents of the log display or click Save to File to save the log file.
Saving the Log File
You can save the test log to a log file for later viewing or printing. When new data is written to a saved
file, the data is appended to the end of the file. Each entry has a two-line header that contains the
identifier of the HBA being tested and the date and time of the test. Over time, the data accumulates to
form a chronological history of the diagnostics performed on the HBA.
After writing an entry into the log, you are prompted to clear the display.
The default name of the saved file is DiagTestLog.log and by default is located in:
/usr/sbin/hbanyware/Dump