Filter
Top Products
Solaris SFS Driver User Manual Page 147
MSG_ID: 0432 Debug: Ring Reset
VERBOSE_MASK: LOG_SLI (0x00000010)
DESCRIPTION: This indicates an SLI ring is being reset.
SEVERITY LEVEL: Debug
MESSAGE: Ring reset
ACTION: No action needed, informational.
MSG_ID: 0440 Debug: Adapter Msg
VERBOSE_MASK: LOG_SLI (0x00000010)
DESCRIPTION: This indicates that a message was sent to the driver from the adapter.
SEVERITY LEVEL: Debug
MESSAGE: Adapter msg
ACTION: No action needed, informational.
MSG_ID: 0450 Error: IOCB Invalid
VERBOSE_MASK: LOG_SLI (0x00000010)
DESCRIPTION: This indicates that an IOCB was received from the adapter with an illegal value. This error
could indicate a driver or firmware problem.
SEVERITY LEVEL: Error
MESSAGE: IOCB invalid
ACTION: No action needed. If problems persist, report these errors to Technical Support.
MSG_ID: 0451 Debug: IOCB Queue Full
VERBOSE_MASK: LOG_SLI (0x00000010)
DESCRIPTION: This indicates that the IOCB queue is full. This will occur during normal operation.
SEVERITY LEVEL: Debug
MESSAGE: IOCB queue full
ACTION: No action needed, informational.
MSG_ID: 0452 Debug: IOCB Error
VERBOSE_MASK: LOG_SLI (0x00000010)
DESCRIPTION: This indicates an IOCB local error is being reported by the adapter.
SEVERITY LEVEL: Debug
MESSAGE: IOCB error
ACTION: No action needed, informational.
MSG_ID: 0453 Debug: IOCB Stale
VERBOSE_MASK: LOG_SLI (0x00000010)
DESCRIPTION: This indicates an IOCB completed after its associated packet completed.
SEVERITY LEVEL: Debug
MESSAGE: IOCB stale
ACTION: No action needed, informational.
MSG_ID: 0460 Debug: SLI Detail
VERBOSE_MASK: LOG_SLI _DETAIL (0x20000000)
DESCRIPTION: This provides detailed information about an SLI event.
SEVERITY LEVEL: Debug
MESSAGE: SLI detail
ACTION: No action needed, informational.