Filter
Top Products
Solaris SFS Driver User Manual Page 123
dev_remove <wwpn> - Remove the FC device from Leadville management.
link_status <d_id> - Request link error status from a specified D_ID.
get_fcode_rev - Returns the current Fcode revison of the HBA.
download_fcode [filename] - Download the HBA fcode.
get_fw_rev - Returns the current firmware revison of the HBA.
download_fw [filename] - Download the HBA firmware.
get_boot_rev *Returns the current boot revison of the HBA.
download_boot [filename] *Download the HBA boot image.
get_dump_size - Returns the HBA's firmware core dump size.
force_dump - Force a firmware core dump on this HBA.
get_dump <-t,-b> <file> - Saves firmware core dump to a file.
get_topology - Returns the current FC network topology.
reset_link <wwpn,0> - Resets the link of a specified FC device.
reset_hard - Reset the HBA.
reset_hard_core - Reset the HBA firmware core.
diag <test> - Perform a diagnostic test on the HBA.
ns - Performs a complete query of the fabric name server.
parm_get_num *Returns the total number of configurable parameters.
parm_get_list *Returns a list of configurable parameters.
parm_get <label> *Gets the value of a specified parameter in the driver.
parm_set <label> <val> *Sets the value of a specified parameter in the driver.
msgbuf all or <number> [-i interval] *Returns the driver's internal message log.
get_host_attrs - Returns the host adapter and port attributes.
get_port_attrs <index>, <wwn> or all - Returns the port attributes.
get_path <index> - Returns the adapter path.
get_vpd *Returns the adapter’s Vital Product Data (VPD).
boot_code [enable or disable] - *Sets or shows the boot code state in this HBA
q - Exits this program.
h - Returns this help screen.
hba - Select another hba.
p - Repeat previous command.
*Emulex adapters only
hba
Allows you to select another HBA to interface with. This prevents you from having to exit and reenter the
program.
Example:
emlxadm> hba
Available HBA's:
1. /devices/pci@1e,600000/SUNW,qlc@3/fp@0,0:devctl (CONNECTED)
2. /devices/pci@1e,600000/SUNW,qlc@3,1/fp@0,0:devctl (NOT CONNECTED)
3. /devices/pci@1e,600000/SUNW,emlxs@2/fp@0,0:devctl (CONNECTED)
4. /devices/pci@1e,600000/SUNW,emlxs@2,1/fp@0,0:devctl (NOT CONNECTED)
Enter an HBA number or zero to exit:
p
Repeats the last command.
Example:
emlxadm> get_num_devs
There are 4 devices reported on this port.
emlxadm> p
emlxadm> get_num_devs
There are 4 devices reported on this port.