Filter
Top Products
Solaris SFS Driver User Manual Page 39
Configuring Discovery Settings
Use the HBAnyware Discovery Settings dialog box to configure several discovery server parameters.
You can define when to start the discovery server, when to refresh in-band and out-of-band discoveries
and when to remove previously discovered HBAs that are no longer being discovered.
Figure 5: HBAnyware Utility, HBA Discovery Settings Dialog Box
To configure discovery settings:
1. Start the HBAnyware utility.
2. From the menu bar, select Discovery/Modify Settings. The Discovery Settings dialog box
appears.
3. Define the discovery properties you wish and click OK. Click Defaults to return the discovery
properties to their default settings.