Filter
Top Products
Solaris SFS Driver User Manual Page 53
• Update Firmware - Click to this button to display the HBAnyware Firmware Download dialog
box. Using the HBAnyware Firmware Download dialog box, browse to the file you wish to
download and download the file. See the “Update Firmware” topic on page 55 for more
information.
Viewing Target Mapping
The Target Mapping tab in the HBAnyware utility enables you to view current target mapping and to set
up persistent binding. You can also set up persistent binding using lputil.
To view target mapping:
1. Start the HBAnyware utility.
2. Select Host or Fabric sort.
3. Select an HBA in the discovery-tree.
4. Select the Target Mapping tab.
Figure 16: HBAnyware Utility, Target Mapping Tab
Target Mapping Field Definitions
Current Settings Area
• Active Bind Type -N/A
• Automapping - N/A
Current Mappings Table
• This table lists all currently mapped targets for the selected HBA.
Persistent Binding Configuration Table
• This table lists persistent binding information for the selected HBA.