Filter
Top Products
Solaris SFS Driver User Manual Page 8
6. When prompted by pkgadd, choose to install the HBAnyware utility.
7. When prompted by pkgadd, answer the HBAnyware installation questions.
Installing the HBAnyware Utility with Web Launch
Prerequisites
Before installing the HBAnyware utility with Web Launch, ensure your systems meet the following
requirements.
• The system on which you are installing the Web Launch services package (the server) requires
that the HTTP Web server be configured to handle the JNLP MIME file type. Follow these steps:
a. Change your working directory to the directory containing the Apache configuration files for
example: /etc/apache or /etc/apache2).
b. Edit the file “mime.types”.
c. Add the following line to the file:
application/x-java-jnlp-file jnlp JNLP
d. Save the file.
e. Stop and restart the HTTP Web server (to enable the Web server to detect this change).
• The system on which you are running the browser (the client) requires the Java Runtime
Environment (JRE) 5.0 or later must be installed on the browser host. Below are the specific
requirements:
• Sun 32-bit JRE 5.0 or later for Intel based systems (x86 and IA64)
• Sun 32-bit JRE 5.0 or later x86-64
Refer to the appropriate vendor documentation for detailed instructions about configuring and
starting the HTTP server and installing the JRE.
• The HBAnyware utility must be installed before installing HBAnyware with Web Launch.
Procedure
To install HBAnyware with Web Launch:
1. Log on as ‘root’.
2. Navigate to the HBAnyware directory. Type:
cd /usr/sbin/hbanyware
3. Run the install script. Type:
./wsinstall
4. When prompted, enter the Web server's document root directory. For example:
/srv/www/htdocs
5. You are provided with the IP address of the host and asked if that is the IP address that is being
used by your Web server. Answer Y or N as appropriate. If you answer N, you are prompted for
the IP address you wish to use.
6. You are asked if your web server listening on the normal default HTTP port (80)? Answer Y or N
as appropriate. If you answer N, you are prompted for the port you wish to use.
You are notified the installation of the HBAnyware Web Launch package has completed.