Filter
Top Products
Solaris SFS Driver User Manual Page 40
Sorting HBAs
Sort discovered HBAs by host name, fabric name, HBA name, target name and LUN number. You can also
choose to view local HBAs or remote HBAs. By default, both local and remote HBAs are sorted by host
name/fabric name.
To sort HBAs:
1. Start the HBAnyware utility.
2. Switch between host name or fabric ID in one of two ways:
• From the menu bar: click View, then click Sort by Host Name or Sort by Fabric ID. The
current adapter display mode is checked.
• From the toolbar, click one of the following buttons:
Sort HBAs by Host Name (default).
Sort HBAs by Fabric ID.
3. The HBAnyware utility sorts in ascending order. The sort recognizes letters, numbers, spaces
and punctuation marks.
Sorting by Host Name
• Initially sorts by host name. You cannot change host names using the HBAnyware utility; names
must be changed locally on that system.
• Within each host system, sorts by HBA model.
• If multiple HBAs have the same model number, sorts models by World Wide Node Name
(WWNN).
• If targets are present, sorts by World Wide Port Name (WWPN). Multiple HBAs may refer to the
same target.
• If LUNs are present, sorts by LUN number.
Sorting by Fabric Address
• Initially sorts by fabric ID.
• Within each fabric ID, sorts by HBA model.
• If multiple HBAs have the same model number, sorts models by WWNN.
• If targets are present, sorts by WWPN. Multiple HBAs may refer to the same target.
• If LUNs are present, sorts by LUN number.
• If the fabric ID is all zeros, no fabric is attached.
Sorting Local HBAs Only
Displays local HBA's only. Works in conjunction with the Sort by Host Name and Sort by Fabric ID buttons.
To display local HBAs only, do one of the following:
• From the menu bar: click View, then click Local HBAs Only. The current adapter display mode
is checked.
• From the toolbar, click the Local HBAs Only
button.