Filter
Top Products
Solaris SFS Driver User Manual Page 70
Performing Diagnostic Tests
Use the Diagnostics tab to do the following:
• Run these tests on Emulex HBA's installed in the system:
• PCI Loopback (see page 74)
• Internal Loopback (see page 74)
• External Loopback (see page 74)
• Power-On Self Test (POST) (see page 71)
• Echo (End-to-End) (see page 75)
• Quick Test (see page 70)
• Perform a diagnostic dump (see page 72).
• View PCI registers and wakeup parameter (see page 72).
• Control HBA beaconing (see page 71).
Figure 31: HBAnyware Utility, Diagnostics Tab
All functions are supported locally and remotely, except for the dump feature which is only supported
locally.
Running a Quick Test
The Diagnostics tab enables you to run a "quick" diagnostics test on a selected HBA. The Quick Test
consists of 50 PCI Loopback test cycles and 50 Internal Loopback test cycles.
To run a quick test:
1. Start the HBAnyware utility.
2. From the discovery-tree, select the HBA on which you wish to run the Quick Test.