Filter
Top Products
Solaris SFS Driver User Manual Page 32
Wakeup
Syntax: HBACMD wakeup <wwpn>
Description: Shows wakeup parameter data for the HBA specified by the WWPN. To show wakeup
parameter data for HBA 10:00:00:00:c9:2e:51:2e, type:
hbacmd wakeup 10:00:00:00:c9:2e:51:2e
Sample response:
Parameters:
WWPN - The World Wide Port Name of the HBA whose wakeup parameter data you want to show.
LoopMap
Syntax: HBACMD loopmap <wwpn>
Description: Shows the arbitrated loop map data for the HBA specified by the WWPN. To show the
arbitrated loop map data for HBA 10:00:00:00:c9:2e:51:2e, type:
hbacmd loopmap 10:00:00:00:c9:2e:51:2e
Below is a sample response:
AL_PA:
01 Local Adapter
E8 SCSI Device
E4 SCSI Device
CA SCSI Device
Parameters:
WWPN - The World Wide Port Name of the HBA whose loopmap you want to show.
GetBeacon
Syntax: HBACMD getbeacon <wwpn>
Description: Shows the current beacon status for the HBA specified by the WWPN. To show the current
beacon status for HBA 10:00:00:00:c9:2e:51:2e, type:
For example, type:
hbacmd getbeacon 10:00:00:00:c9:2e:51:2e
Possible responses are:
Beacon State = On
Beacon State = Off
Unable to get Beacon state, error 1
Beaconing not supported on host or adapter
Parameters:
WWPN - The World Wide Port Name of the HBA whose beacon status you want to show.
Wakeup Parameters:
Initial Load: 0x02C03992 0x00103411
Flags: 0x00000000
Boot BIOS 0x03433290 0x00101303
SLI-1: 0x06433992 0x00103411
SLI-2: 0x07433992 0x00103411
Has Expansion ROM 0