Filter
Top Products
Solaris SFS Driver User Manual Page 72
Creating Diagnostic Dumps
The diagnostic dump feature enables you to create a “dump” file for a selected HBA. Dump files contain
various information such as firmware version, driver version and so on, that is particularly useful when
troubleshooting an HBA.
To start a diagnostic dump:
1. Start the HBAnyware utility.
2. From the discovery-tree, select a local HBA whose diagnostic information you wish to dump.
3. Select the Diagnostics tab and click Diagnostic Dump. The Diagnostic Dump dialog box
appears. You can specify how many files you want to save using the Files Retained counter.
Click Delete Existing Dump Files if you wish to remove existing dump files from your system.
Figure 34: HBAnyware Utility, Diagnostic Dump Dialog Box
4. Click Start Dump.
Displaying PCI Registers and Wakeup Information
A PCI Register dump for the selected HBA appears in the lower left panel of the Diagnostics tab.
Wakeup information for the selected HBA appears in the lower right panel of the Diagnostics tab. The
information is read-only and is depicted below:
Figure 35: HBAnyware Utility, PCI Registers and Wakeup Parameters Area of the Diagnostics Tab
Note: The Diagnostic Dump feature is only supported for local HBAs. If a remote
HBA is selected from the tree-view, the Initiate Diagnostic Dump is disabled.