Filter
Top Products
Solaris SFS Driver User Manual Page 149
MSG_ID: 0602 Notice: Node Create Failed
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that a node create request for a remote device has failed.
SEVERITY LEVEL: Notice
MESSAGE: Node create failed
ACTION: No action needed, informational.
MSG_ID: 0603 Debug: Node Updated
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that a node has been updated for a remote device.
SEVERITY LEVEL: Debug
MESSAGE: Node updated
ACTION: No action needed, informational.
MSG_ID: 0610 Debug: Node Destroy
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that a node has been destroyed for a remote device.
SEVERITY LEVEL: Debug
MESSAGE: Node destroyed
ACTION: No action needed, informational.
MSG_ID: 0611 Debug: Node Closed
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that a node has been temporarily closed for I/O transport.
SEVERITY LEVEL: Debug
MESSAGE: Node closed
ACTION: No action needed, informational.
MSG_ID: 0612 Notice: Node Missing
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that an FCP2 device node has been found missing.
SEVERITY LEVEL: Notice
MESSAGE: Node missing
ACTION: No action needed, informational.
MSG_ID: 0620 Debug: Node Not Found
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that there was an attempt to send an I/O packet to an unknown device
node. The driver maintains a node table entry for every device it needs to communicate with on the FC
network.
SEVERITY LEVEL: Debug
MESSAGE: Node not found
ACTION: No action needed, informational. If problems persist, report these errors to Technical Support.