Filter
Top Products
Solaris SFS Driver User Manual Page 153
MSG_ID: 0911 Debug: TXQ Watchdog
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This indicates that I/O(s) was found missing from the transmit queue.
SEVERITY LEVEL: Debug
MESSAGE: TXQ watchdog
ACTION: No action needed, informational.
MSG_ID: 0920 Debug: Packet Flush
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This indicates that an I/O packet is being flushed.
SEVERITY LEVEL: Debug
MESSAGE: Packet flush
ACTION: No action needed, informational.
MSG_ID: 0921 Debug: Packet Flushed
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This indicates that an I/O packet has been flushed.
SEVERITY LEVEL: Debug
MESSAGE: Packet flushed
ACTION: No action needed, informational.
MSG_ID: 0922 Notice: Packet Flush Timeout
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This indicates that an I/O packet flush request has timed out with some I/O packets still
not completed. The driver will attempt to recover by itself.
SEVERITY LEVEL: Notice
MESSAGE: Packet flush timeout
ACTION: No action needed, informational. If problems persist, report these errors to Technical Support.
MSG_ID: 0930 Notice: Packet Transport Failed
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This indicates that an attempt to send an I/O packet failed. The I/O packet will be retried
by the upper layer.
SEVERITY LEVEL: Notice
MESSAGE: Packet transport failed
ACTION: No action needed, informational.
MSG_ID: 0931 Error: Packet Transport Error
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This indicates that an error occurred while attempting to send an I/O packet. The I/O
packet will likely be failed back to the user application.
SEVERITY LEVEL: Error
MESSAGE: Packet transport error
ACTION: No action needed. If problems persist, report these errors to Technical Support.